Panasonic M1111TY0 -FJ User Manual

57

Basic 

operations

 Registering marks

Marks can be registered and events inserted at the event 
points.

 

 Pause

 

 Clip playback

 

 GPI-Out output

Use 

0, 1, 2 and . to select the event where the 

mark is to be registered or the event inserted.

Press the 

e button to display the Event Memory 

menu.

Use [F1] to display the Mark sub menu.

Use [F2] (PAUSE item), [F3] (CLIP item) or [F4] 

(GPI-Out item) to select the item.

When “On” is selected and the mark is 
registered in the event point, playback is 
paused at the mark position during event 
playback.
“||” appears above the timeline.

When “Clip1” or “Clip2” is selected and the 
mark is registered in the event point, the clip 
is played back at the mark position during 
event playback.
“

” appears above the timeline.

When a GPI output port from “GPI-O1” 
to “GPI-O19” is selected and the mark is 
registered in the event point, pulse signals 
are output from the GPI Output port at the 
mark position during event playback.
“

” appears above the timeline.

  For the Confi g menu 

 GPI-Out Port 1/5 

sub menu to GPI-Out Port 5/5 sub menu 

 

Assign item, check that the selected GPI 
output port is set to “Event MEM”.

Press 

6 to register the mark.

In addition, press 

4 to insert the event.

To cancel the mark registration or event insertion, press 
the 

C button.

 Setting the event duration

The lengths of the events can be set.

Use 

0, 1, 2 and . to select the event to be 

modified.

Press the 

e button to display the Event Memory 

menu.

Use [F1] to display the Event Duration sub menu.

Use [F2] (minute item: minutes), [F3] (second item: 

seconds) and [F4] (frame item: frames) to set the event 
length.

Press [F5] to enter the duration.

To cancel what has been modified, press the 

C button.

 Setting the total duration

The total length of all the events from start to end can be set.
When the total duration is changed, the durations of the 
events contained in the event memories are re-calculated 
using the duration ratio prior to the change.
However, the shortest duration of an event cannot be shorter 
than one frame.

Press the [EVENT MEM] button and light its indicator.

Press the [RECALL] button to light its indicator, and use 

the 

P button and number keys (1 to 10) to select the 

event memory to be modified.
  Refer to “1-10-3. Recalling the operations stored in 

the memory (Recall)”.

Press the 

e button to display the Event Memory 

menu.

Use [F1] to display the Total Duration sub menu.

Use [F2] (minute item: minutes), [F3] (second item: 

seconds) and [F4] (frame item: frames) to set the event 
length.

Press [F5] to enter the duration.

 

 If no more events can be contained in the total duration 

which already has many events and which has been 
changed, the number of frames will be forcibly adjusted.