Panasonic M1111TY0 -FJ User Manual

9

Basic 

operations

Operate the fader lever to execute transitions manually.
If the fader lever has been operated during auto transition, 
auto transition will be switched to manual operation as soon 
as the fader position overtakes the amount of the transition 
being executed.
The bus tally LEDs on the left of the fader lever indicate the 
program bus output status.

PGM/A bus output

During the transition

PST/B bus output



 When the [AUTO] button is pressed, the transition is 

executed automatically using the transition time which has 
been set.



 The transition is executed in the remaining time when the 

[AUTO] button is pressed while the fader lever is being 
operated.



 The auto transition time is set using the Time menu.

Press the 

t button to light its indicator, and display the 

Time menu.

Use [F1] to display the BKGD sub menu.

Set the transition time.

When setting the transition time in frame units
 

 Use [F4] to set the transition time in frames.

When setting the transition time in second units
 

 Use [F3] to set the time in seconds and [F4] to set it 
in frames.

The display unit is set by selecting Config menu 

 

Operate sub menu 

 Time Unit item.

The time is displayed as a number of 
seconds.

The time is displayed as a number of frames.

Any time from 0 to 999f can be set. The time which can 
be set when seconds are used as the display unit differs 
depending on the system format.

max. 33s09f

max. 16s39f

max. 39s24f

max. 19s49f

max. 41s15f

max. 41s15f

When the [CUT] button is pressed, the transition is executed 
instantly.