Panasonic M1111TY0 -FJ User Manual
90
2. Input/output signal settings
2-2-3. Setting the DVI output signals
Set the DVI output signals of the standard output (DVI OUT) and the DVI output signals if the DVI/analog output board (option)
has been connected.
has been connected.
On the Output sub menu, use [F2] to select the output to be set using the Select item.
Refer to “2-2. Output signal settings”.
Use [F1] to display the DVI Output sub menu.
Use [F2] to select the signal system using the Mode item.
Set this when the DVI/analog output board (AV-HS04M5) has been connected.
Digital
DVI digital signals are output from the DVI connector.
Analog
DVI analog signals (RGB) are output from the DVI connector.
When “Analog” has been selected, the display position of the image may be off depending on the monitor
which is connected. If it is off, adjust the position at the monitor.
For details on the adjustment method, refer to the operating instructions of the monitor.
When “Analog” has been selected, the display position of the image may be off depending on the monitor
which is connected. If it is off, adjust the position at the monitor.
For details on the adjustment method, refer to the operating instructions of the monitor.
Use [F3] to select the resolution of the images to be output using the Size item.
Auto
The equipment information of the output destination is captured by the DVI signals, and the images are
output at the optimum resolution.
The vertical frequency is 60 Hz, and the maximum resolution is SXGA for analog output signals and
WUXGA for digital output signals.
If the equipment information cannot be captured or if the resolution and frequency which can be output by
the unit are not contained in the equipment information, the images will be output at the XGA setting.
output at the optimum resolution.
The vertical frequency is 60 Hz, and the maximum resolution is SXGA for analog output signals and
WUXGA for digital output signals.
If the equipment information cannot be captured or if the resolution and frequency which can be output by
the unit are not contained in the equipment information, the images will be output at the XGA setting.
Other signals are listed in the table below.
<Table of DVI output signal settings>
DVI output signal
Standard output (DVI OUT)
DVI/Analog Output Board
Size
Output
(Digital)
(Digital)
(Analog)
XGA
(1024
768)/60 Hz
WXGA
(1280
768)/60 Hz
SXGA
(1280
1024)/60 Hz
WSXGA+
(1680
1050)/60 Hz
—
UXGA
(1600
1200)/60 Hz
—
WUXGA
(1920
1200)/60 Hz
—
1080/59.94p
(1920
1080)/59.94 Hz
—
1080/50p
(1920
1080)/50 Hz
—
1080/59.94i
(1920
1080)/59.94 Hz
—
—
1080/50i
(1920
1080)/50 Hz
—
—
720/59.94p
(1280
720)/59.94 Hz
—
—
720/50p
(1280
720)/50 Hz
—
—
: Can be set.
—: Cannot be set.
The DVI signals cannot be output if the system format is 1080/23.98PsF or 1080/24PsF.