Netgear XS712T User Manual
10
XS712T Smart Switch
Front Panel and Back Panel Configuration
The smart switch has 12 100M/1000M/10G copper ports and two combo 1000 Mbps/10 Gbps
SFP+ fiber ports. Each port is capable of sensing the line speed and negotiating the duplex
mode with the link partner automatically.
SFP+ fiber ports. Each port is capable of sensing the line speed and negotiating the duplex
mode with the link partner automatically.
The following figure illustrates the front panel of the smart switch.
Power
Reset
Fan
Factory
Defaults
XS712T
1
2
3
4
5
6
7
8
9
10
11T
11F
12F
12T
Power and
Link/Speed/ACT LEDs
100M/10G
SFP ports
SFP ports
Reset button
Factory
Defaults button
Defaults button
Fan LEDs
100M/1000M/10G Ethernet ports
Figure 2. Front panel
The front panel contains the following:
•
12 RJ-45 connectors for 100M/1000M/10G AutoSensing Gigabit Ethernet switching ports
•
Two combo 1000 Mbps/10 Gbps SFP+ Gigabit Ethernet switching ports
•
Reset button to restart the device
•
Recessed Factory Defaults button to restore the device back to the factory defaults
•
Link, Speed, and ACT LEDs for each port
•
Power and Fan LEDs
The following figure illustrates the smart switch back panel.
Power connector
Kensington Lock™ slot
Figure 3. Back panel
The back panel contains a power connector.
LED Designations
The following sections describe the LED designations.