NEC NWA-008869-001 User Manual
CHAPTER 5 EXAMPLES OF SETUP ON NETWORKS
– 120 –
NWA-008869-001 Rev.1.0
atch5001.fm
ROUTING SETUP EXAMPLES (IPv6)
Using the following IPv6 network, this section explains basic routing setup. In this example, the routing
setup required for terminal A to gain access to terminal B is explained.
setup required for terminal A to gain access to terminal B is explained.
It is assumed that on terminal A, “automatic address setting”, which is one of the features of IPv6, is used.
The setup includes the following operations:
(1) Enable automatic address setting
(2) Set a static route
(3) Set RIPng
(4) Check the communication state
(1) Enable automatic address setting
(2) Set a static route
(3) Set RIPng
(4) Check the communication state
Routing Setup Example (IPv6)
In-Skin Router
2000 IPS
LAN1
LAN2
CONSOLE
3ffe:200::1
Network A
Network B
Router A
Local console
Terminal B
3ffe:300::2
3ffe:300::2
3ffe:200::/64
3ffe:300::/64
LAN1=10/100BASE-TX (FastEthernet)
LAN2=10BASE-T (Ethernet)
LAN2=10BASE-T (Ethernet)
Terminal A
3ffe:100::2
3ffe:200::2
3ffe:300::1
Network C
3ffe:100::/64
Automatic
address setting
address setting
ROUTING SETUP EXAMPLES (IPv6)