Multi-Tech Systems RF550VPN User Manual

Multi-Tech Systems, Inc. RF550VPN Quick Start Guide

Remote IPSec Identifier).

When enabled, will automatically renegotiate VPN if a
tunnel is temporarily interrupted.

Enabled

Choose whether the remote site will be used by a
single user or a LAN.

When enabled, will allow Microsoft File and Printer
sharing to communicate information about computers
on the network.

Enabled

Remote IP Network Enter Remote IP Network address (LAN) for Site B.

192.168.10.0

Remote IP Netmask Enter Remote IP Netmask address for Site B.

255.255.255.0

Enter Remote Gateway IP address (WAN) for Site B.

204.26.122.3

Select the Network Interface from the drop-down list
box.

WAN
ETHERNET

Select IKE (the default) to set how inbound packets will be
filtered. IKE primarily encompasses router key exchange and
the negotiation of security policy. Selecting IKE activates the
remaining input settings on this screen.

Check the Enabled button.

Select 3DES.

Enter the PreShared Key name. You
can enter an alphanumeric name, but it
must match the security code for the
RouteFinder at site B.

1234

Enter the amount of time that tells the
router to renegotiate the Key

3600 seconds
is 60 minutes

Enter the amount of time that tells the
router to renegotiate the IKE security
association.

28800 seconds
is 8 hours

Click the Save button. Your defined connections are displayed at the bottom of this screen
where you can edit or delete them.