Multi-Tech Systems RF500S User Manual
Chapter 3 – Configure and Manage Using a Web Browser
RouteFinder RF500S User Guide
30
Device Status
Click the
Device Status
button. The Device Status screen displays.
The
Device Status
screen displays the status of the current connection. It shows the status
of the Cable/xDSL modem and the Modem Backup. It also shows the IP Address, the LAN
Mac Address, and the WAN Mac Address.
Mac Address, and the WAN Mac Address.
WAN Ethernet – This describes the current connection status of the Cable/xDSL Modem.
When the Cable/xDSL is connected, the screen displays a message
When the Cable/xDSL is connected, the screen displays a message
Cable/xDSL: Active.
Release Button – Click this button to disconnect the Cable/xDSL modem from the
RF500S.
Renew Button – Click this button to re-connect the Cable/xDSL modem to the RF500S.
Modem Backup – A modem can be used as a dialup backup for the Cable/xDSL modem.
If this modem is the current connection, the screen displays a message
RF500S.
Renew Button – Click this button to re-connect the Cable/xDSL modem to the RF500S.
Modem Backup – A modem can be used as a dialup backup for the Cable/xDSL modem.
If this modem is the current connection, the screen displays a message
Modem: Active
.
Device IP - Shows the Device IP address, private LAN MAC address, and public WAN
MAC address of the home Internet gateway.
DHCP Log Button – Click this button to view the current DHCP client information. The
log will display at the button of the screen.
MAC address of the home Internet gateway.
DHCP Log Button – Click this button to view the current DHCP client information. The
log will display at the button of the screen.