Nortel Networks 114200-E User Manual
Installing and Operating Passport ARN Routers
B-16
114200-E Rev 00
Running the Quick-Start Script
The Quick-Start script is called inst_arn.bat and you run it as part of the Local
Boot process.
Boot process.
Begin local boot as follows:
1.
At the Technician Interface
login:
prompt, enter
Manager
to log in.
2.
Enter
bconfig config local
to configure the router to use the local config
file when booting.
For information about the
bconfig
command, see “Using the bconfig
3.
Reboot the router by entering
boot
.
The Technician Interface login prompt appears.
4.
Log in to the Technician Interface.
The Technician Interface mounts the local file system and displays a prompt
indicating the present working directory.
indicating the present working directory.
SMDS Worksheet
Requested Information
Options
Your Response
Enter 10-digit individual address:
Enter the individual address
assigned to you by your SMDS
service provider.
assigned to you by your SMDS
service provider.
Enter 10-digit group address:
Enter the group address
assigned to you by your SMDS
service provider.
assigned to you by your SMDS
service provider.
Enter 10-digit arp address:
Enter the Address Resolution
Protocol (ARP) address
assigned to you by your SMDS
service provider.
Protocol (ARP) address
assigned to you by your SMDS
service provider.
Note:
Before you run the Quick-Start script, make sure you have the
completed worksheets with you.