Navionics 87043_1 User Manual

Page of 54
10
E-Series Installation Manual
Media storage cards
Navionics Chart cards
To use your E-Series Display as a navigation aid, charts with detailed information for 
the area you wish to navigate are required. The charts are available on Navionics
®
 
Chart cards.
A chart card provides an appropriate level of detail and scale for a given geographic 
area.
To obtain suitable Navionics Chart Cards, contact your local dealer or visit the 
Navionics web sites: www.navionics.com or www.navionics.it. 
Alternatively, in North America call Navionics toll-free on 1-800-848-5896. 
Outside of North America, contact your local dealer or call Navionics SpA on tel: 
(+39) 0584 961696 or fax: (+39) 0584 961309.
CompactFlash cards
It is possible to archive or transfer information to and from your E-Series display and 
other compatible instruments using CompactFlash cards. To achieve the best results it 
is recommended that SAN DISK
®
 CompactFlash cards are used.
2.3 Functionality
For full functionality of the displays the following position and heading data is 
required:
• Orientation - requires heading data derived from a suitable compass, for the 
radar to operate in North Up or Course Up mode and the chart to operate in Course 
Up and Head Up modes.
• Man Overboard (MOB) - requires heading and speed data. Alternatively, use 
speed over ground (SOG) and course over ground (COG) derived from the same 
source as position data (GPS).
• Mini Automatic Radar Plotting Aid (MARPA) and radar/chart over-
lay functions - requires accurate heading data. MARPA functionality is provided 
if SOG and COG are also available. Increased accuracy will be obtained by using 
fast heading data from a suitable compass, Smart heading sensor or compatible 
Raymarine autopilot.
• Chart display - requires position data (GPS).