Navionics 87043_1 User Manual

28

E-Series Installation Manual

Radar cable (not supplied)

Having ensured that the radar scanner you are using is compatible with the E-Series 
Display (see “Compatibility” on page 9), the cable should be connected as follows:

Connecting to a Radome

If you are using a radome this can be powered through the display. Just run your cable 
and connect it to the radome and the display. 

If the existing cable is too short, please order from the following:

            

Connecting to an open array

If you are using an open array, this cannot be powered through the display. You will 
need to purchase a split pedestal cable:

...for new installations

            

            

Part No.

Cable length

Weight

Radome power output

E55065

15m

Heavy

2Kw or 4 Kw

E55066

25m

Heavy

2Kw or 4 Kw

E55067

10m

Light

2kw

E55068

15m

Light

2kw

Part No

Description

E55063

15m Split pedestal cable

E55064

25m Split pedestal cable

To display

To power

To Open
Array Scanner

D7209-1

Note:  You should ensure that the distance (cable route) from the power supply to the
open array is kept to a minimum.