Nortel Networks 2700 User Manual
Chapter 4 Installing option cards and DIMMs 61
Nortel VPN Router Installation — VPN Router 2700
Removing the front bezel and top cover
To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
cover from the gateway.
To remove the front bezel:
1
Shut down the VPN Router 2700 using the Web GUI or the CLI and then
unplug it as described in
unplug it as described in
2
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
quarter turn counterclockwise
Figure 20
Removing the front bezel
3
Grip the two handles, and firmly pull the bezel toward you to unsnap it from
the chassis.
the chassis.
Warning:
Risk of electric shock
Turn off the VPN Router 2700, and unplug the power cord before you
attempt to remove or install an option card or DIMM.
attempt to remove or install an option card or DIMM.
Caution:
Risk of equipment damage
Do not use the piece with the Nortel Networks logo and the LEDs as a
handle.
handle.
CS260015B