Nortel Networks 2700 User Manual

  Chapter 4  Installing option cards and DIMMs

NN46110-311 02.01

 provides additional guidelines for option card installation when an SSL 

VPN Module 1000 is installed in slot 1.

V.90 modem interface

4

If an SSL VPN Module 1000 is in slot 1, do not 

install the V.90 modem interface card in slot 2.

Single V.35/X.21 WAN interface 

(full-height)

4

Single V.35/X.21 WAN interface 

(half-height)

8

4

HSSI WAN interface

9

2

Do not install in slot 4; install in slot 3 or 1 if possible. 

If an SSL VPN Module 1000 is installed, you can 

install only one HSSI WAN interface card.

1 The VPN Router 2700 must be running Version 5.0 or later.
2 The VPN Router 2700 must be running Version 4.90 or later.
3 To support two Hardware Accelerator cards, the gateway must be running Version 4.76 or later.
4 The VPN Router 2700 must be running Version 5.05.330, 6.05.140 and later, 7.00.062, 7.05.100 and later, or 7.05.300 

and later. The VPN Router 2600 supports 10/100 Mbps operation only.

5 The VPN Router 2700 must be running Version 5.0 or later.
6 The VPN Router 2700 must be running Version 4.90 or later.
7 The VPN Router 2700 must be running Version 4.80 or later.
8 The VPN Router 2700 must be running Version 4.80 or later.
9 The gateway must be running Version 4.76 or later, or the hardware revision must be at least 03.

Installing other option cards with the SSL VPN Module 1000 

VPN Router Security Accelerator

Only one VPN Router Security Accelerator card can be 

installed.

Hardware Accelerator

You can install two cards only if none of these cards is installed:
•

VPN Router Security Accelerator 

•

1000BASE-T or 1000BASE-SX

•

HSSI

If a 1000BASE-T (1000 MT), 1000BASE-SX, Security 

Accelerator, or HSSI card is installed, only one Hardware 

Accelerator card can be installed.

Supported option cards for the 2600 and 2700