Nortel Networks 2700 User Manual
92
Appendix A Technical specifications
NN46110-311 02.01
provides the ISDN BRI U cable pinouts.
T1/E1 CSU/DSU WAN interface card
The T1/E1 CSU/DSU WAN interface card has a single connector that provides the
signals needed to interface to T1 or E1 equipment. Nortel ships this interface card
as a half-height card and as a full-height card.
signals needed to interface to T1 or E1 equipment. Nortel ships this interface card
as a half-height card and as a full-height card.
shows the T1/E1 CSU/DSU WAN interface card (half-height card)
.
Figure 39
T1/E1 CSU/DSU WAN interface card
shows the T1/E1 CSU/DSU WAN interface card
(full-height card).
Table 28
ISDN BRI U cable pinouts
Pin
Function
1
N/C
2
N/C
3
N/C
4
U interface network connection (tip)
5
U interface network connection (ring)
6
N/C
7
N/C
8
N/C
Note: For E1 service, you must install the half-height version of the
T1/E1 CSU/DSU WAN interface card.