Nortel Networks BCM50a User Manual

148 Chapter 14 System information and diagnosis

N0115791

With your system you can choose different console port speeds. To get to the 
System Information and Console Port Speed. 

1 Enter 24 to go to Menu 24 – System Maintenance. 

2 Enter 2 to open Menu 24.2 - System Information and Console Port Speed. 

3 From this menu you have two choices, as shown in 

Up Time

This is the time this channel has been connected to the current remote 

node.

My WAN IP 

(from ISP)

This is the IP address of the ISP remote node.

Ethernet

This shows statistics for the LAN.

   Status

This shows the current status of the LAN.

   Tx Pkts

This is the number of transmitted packets to the LAN.

   Rx Pkts

This is the number of received packets from the LAN.

   Collision

This is the number of collisions.

WAN

This shows statistics for the WAN.

   Line Status

This shows the current status of the xDSL line which can be Up or Down.

   Upstream        

Speed

This shows the upstream transfer rate in kbps.

   Downstream 

Speed

This shows the downstream transfer rate in kbps.

CPU Load

This specifies the percentage of CPU utilization.

Note: The console port is not available.

Table 30   Menu 24.1 System Maintenance: Status (continued)