ALTINEX TNP122 User Manual

400-0434-005

3

TILT ‘N PLUG JR.
Designer Interconnect Solutions

All Tilt ‘N Plug Jr.’s belong to a family of compact 
interconnection solutions designed for installation 
into a table as part of a presentation system. They
are designed for mounting into a table, podium, or 
other furniture to provide a way of connecting 
audiovisual equipment on top of the furniture to a 
presentation system below the furniture.

All use the same core element; a multimedia input 
plate that can be "tilted" open when needed and 
pushed closed when not needed. 

The  TNP122 and  TNP142 each  incorporate two 
Tilt ‘N Plug Jr.

modules

and

are

operated 

independently. The  TNP142 is the same as a 
TNP122, but with the modules factory-installed 
facing in opposite directions. The TNP131 is the 
same as a TNP121, but with a round bezel instead 
of a square bezel. 

All signals pass through the input plate directly  to 
cables on the underside of the table with no 
intervening  circuitry.  The use of additional 
ALTINEX  Signal  Management  Solutions

®

such as 

computer video interfaces, distribution amplifiers, 
and switchers may be desirable.

The input plate of the Tilt ‘N Plug Jr. is accessible 
by pushing down on the top cover. The unit then 
auto-tilts

open with help from an internal

pneumatic spring. Once open, the input plate 
remains securely in place. The input plate is 
hidden by pressing down on the top cover until the 
latching mechanism engages. In its closed 
position, the top panel lies flush with the tabletop, 
held in place by the latching mechanism.

All  Tilt ‘N Plug Jr. Signal  Management  Solutions 
come with a standard top and bezel offering a high 
quality matte black finish. Other finishes or special 
bezel configurations are available upon request. 
Please contact an ALTINEX representative to 
discuss custom options. 

Specifications are subject to change.
See 

for up-to-date information.

110 VAC, 60 Hz, 5 A

NEMA F-M

Computer Video

15-pin HD F-M (1)

Stereo Audio

3.5 mm F-M (1)

Network

RJ-45 F-M (1)

Modem

RJ-11 F-M (1)

Hardware

- Mounting screws and 

brackets

- Cable clamps/screws

Table 1. TNP121/121C/131 General

110 VAC, 60 Hz, 5 A

NEMA F-M

Computer Video

15-pin HD F-M (2)

Computer Audio

3.5mm F-M (2)

Network

CAT-6 (RJ-45) F-M (2)

Modem

RJ-11 F-M (2)

Hardware

- Mounting screws and 

brackets

- Cable clamps/screws

Table 2. TNP122/142 General

* Customizable on the TNP121C