3com MSR 20 User Manual
SIC-1SAE
27
Figure 15 RS449 DCE cable
■
RS530 DTE cable
Figure 16 RS530 DTE cable
■
RS530 DCE cable
Figure 17 RS530 DCE cable
For the pinouts of synchronous/asynchronous serial cables (with DB-28
connectors), see Low-End and Mid-Range Series Routers Cable Manual.
connectors), see Low-End and Mid-Range Series Routers Cable Manual.
n
These cables are optional items. Please select one when purchasing a SIC-1SAE
card; by default, the cable is not provided.
card; by default, the cable is not provided.
Connecting the Interface
Cable
w
WARNING:
■
Before plugging or unplugging the interface cable connected to the SIC-1SAE
card, power off the router. Online insertion or removal tends to damage the
port and even the device.
card, power off the router. Online insertion or removal tends to damage the
port and even the device.
■
Before connecting the SIC-1SAE card to a remote device, identify the type of
the device, such as its synchronous/asynchronous mode and DTE/DCE mode,
and the signaling criterion, baud rate and time clock required by the access
device.
the device, such as its synchronous/asynchronous mode and DTE/DCE mode,
and the signaling criterion, baud rate and time clock required by the access
device.