2WIRE 1700HW User Manual

Gateway Installation and Support Guide

Running the 2Wire Setup Wizard Manually

If after one minute the Setup Wizard does not automatically run:

Windows Users:

Double-click the

My Computer

icon located on the desktop.

Double-click the icon that corresponds to your CD-ROM drive.

Double-click

Setup.exe

and follow the on-screen instructions.

Mac Users:

Double-click the

2Wire

icon.

Double-click the

2Wire Setup

Wizard icon.

Verifying That Your PC Adapter Driver is Installed Correctly

There are two common errors that may occur during installation that will result in an error message:

•

The appropriate adapter driver software was not installed.

•

The adapter driver software was only partially installed or is incompatible with your system.

Follow the procedure appropriate to your system to determine whether the driver was correctly installed.

Windows XP:

1. Click

Start

and click

Control Panel

2. Double-click the

System

icon.

3. Select the

Hardware

tab, then click

Device Manager

Continue to step 4 under Accessing Driver Status on page 5.

Windows 2000:

1. Click

Start >Settings

and click

Control Panel

2. Double-click the

System

icon.

3. Select the

Hardware

tab and click

Device Manager

Continue to Step 4 under Accessing Driver Status on page 5.

Windows 98 SE or Windows ME:

1. Click

Start >Settings

and click

Control Panel

2. Click the

System

icon.

3. Select the

Device Manager

tab.

Continue to Step 4 under Accessing Driver Status on page 5.