Zoom 4420-A User Manual
Appendix A. Troubleshooting
78
Appendix A
Troubleshooting
Problem
I followed the instructions for connecting the AP+4 hardware and
entered 10.0.0.200 in my web browser’s address bar, but I
cannot access the AP+4.
entered 10.0.0.200 in my web browser’s address bar, but I
cannot access the AP+4.
Solution
First, manually reset the AP+4: insert a paper clip into the
RESET opening on the back panel and press and hold for 10
seconds. After you’ve done that, re-enter 10.0.0.200 in your web
browser’s address bar.
RESET opening on the back panel and press and hold for 10
seconds. After you’ve done that, re-enter 10.0.0.200 in your web
browser’s address bar.
If you still cannot access the AP+4, follow these steps to check
the computer’s TCP/IP settings.
the computer’s TCP/IP settings.
Windows Vista Users:
1
On the desktop, click the Start button, select Control Panel,
and then double-click Network and Sharing Center.
and then double-click Network and Sharing Center.
2
In the Network and Sharing Center window, in the Tasks
pane, select Manage Network Connections.
pane, select Manage Network Connections.
3
In the Network Connections window, select Local Area
Connection.
If a message appears saying Windows needs your
permission to continue, click Continue.
Connection.
If a message appears saying Windows needs your
permission to continue, click Continue.
4
In the Local Area Connection Properties dialog box, select
Internet Protocol Version 4 (TCP/IPv4) and click
Properties.
Internet Protocol Version 4 (TCP/IPv4) and click
Properties.