Zoom 0335-A 27337 User Manual
20
ADSL Bridge Modem User’s Guide
SuSE
Depending on what you want to do, specify the appropriate
TCP/IP settings as shown in the tables below.
TCP/IP settings as shown in the tables below.
Dynamic IP Addressing
Edit the file /etc/rc.config, search for the variables
NETCONFIG, NETDEV_0, and IFCONFIG_0. Set them as
follows (see the instructions in rc.config):
NETCONFIG, NETDEV_0, and IFCONFIG_0. Set them as
follows (see the instructions in rc.config):
NETCONFIG="_0"
NETDEV_0="eth0"
IFCONFIG_0="dhcpclient"
Reboot with this command: /sbin/shutdown -r now
Static IP Addressing
Add these lines to the file /etc/sysconfig/network/ifcfg-eth0,
setting them equal to the values provided to you by your
Internet service provider. Be sure each value—after the equal
sign—is enclosed in quotes.
setting them equal to the values provided to you by your
Internet service provider. Be sure each value—after the equal
sign—is enclosed in quotes.
BOOTPROTO=”static”
BROADCAST=
IPADDR=
NETMASK=
NETWORK=
Reboot with this command: /sbin/shutdown -r now
Logging into the Zoom Configuration Manager
Add these lines to the file /etc/sysconfig/network/ifcfg-eth0:
BOOTPROTO=”static”
BROADCAST=”10.0.0.255”
IPADDR=”10.0.0.10”
NETMASK=”255.255.255.0”
NETWORK=”10.0.0.2”
(Note that for IPADDR, you can enter any value
between 10.0.0.4 and 10.0.0.20.)
between 10.0.0.4 and 10.0.0.20.)
Reboot with this command: /sbin/shutdown -r now