Zoom 4401A User Manual

8 

Problem 
I followed the instructions for connecting the AP+4 hardware and 
entered 10.0.0.200 in my Web browser’s address bar, but I 
cannot access the AP+4. 

Solution 
First, manually reset the AP+4: insert a paper clip into the 
RESET opening on the back panel and press and hold for 10 
seconds. After you’ve done that, re-enter 10.0.0.200 in your Web 
browser’s address bar.  
If you still cannot access the AP+4, follow the steps below to 
make sure the computer’s TCP/IP settings are correct. 

1 

From the desktop, click the Start button, select Control 
Panel, and then double-click Network and Sharing Center. 

2 

In the Network and Sharing Center window, under Tasks, 
select Manage Network Connections. 

3 

In the Network Connections window, double-click the 
Wireless Network Connection option. 

4 

In the Wireless Network Connection Status dialog box, 
click the Properties button. 

5 

In the Network Connection Properties dialog box, highlight 
the version of TCP/IP that you are using and click the 
Properties button. 

6 

Select Use the following IP address and enter 10.0.0.100 
and 255.255.255.0 as the IP address and Subnet mask, 
respectively. 

7 

Click OK, then click Close. 

8 

Re-enter 10.0.0.200 in your Web browser’s address bar. 

1 

On the Windows desktop, click the Start button, open 
Control Panel, and double-click Network Connections. 

2 

Right-click the Local Area Connection icon and select 
Properties. 

3 

Highlight the Internet Protocol (TCP/IP) entry and click the 
Properties button.