Panasonic WJ-SX 150 User Manual
24
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■
WJ-SX150 Matrix Switcher
●
Front View
q
Operation indicator (OPERATE)
Lights up when the power of the unit is turned on.
Note:
The indicator will blink to indicate rising tempera-
ture in the matrix switcher.
When the indicator blinks, turn the power off and
refer servicing to qualified service personnel.
When the indicator blinks, turn the power off and
refer servicing to qualified service personnel.
w
Reset button (RESET)
Resets and restarts the unit.
Note:
The system configuration is not reset.
e
Unit number selector (UNIT)
This selector is reserved for future use.
Normally, set this switch to "1".
Normally, set this switch to "1".
r
Mode selector (MODE)
Selects the unit's operation mode.
Normally, set all switches to OFF (NORMAL mode) as
shown in the figure.
Normally, set all switches to OFF (NORMAL mode) as
shown in the figure.
SX150 SOFTWARE UPLOAD:
Set the switches to this position when you update
the firmware of the unit. (Refer to the operating
instructions of the multiplexer board.)
the firmware of the unit. (Refer to the operating
instructions of the multiplexer board.)
MULTIPLEXER SOFTWARE UPLOAD:
This mode is reserved for future use.
Matrix Switcher WJ-SX
OPERATE
OPERATE LED WILL BLINK
IF COOLING FAN MALFUNCTIONS
IF COOLING FAN MALFUNCTIONS
q
0
9
8
7
6
5
4
3
2
1
MODE
UNIT
RESET
w
e
r
1
ON
2 3 4
1
ON
2 3 4
1
ON
2 3 4
1
ON
2 3 4
NORMAL
SX150
SOFTWARE UPLOAD
SOFTWARE UPLOAD
MULTIPLEXER
SOFTWARE UPLOAD
SOFTWARE UPLOAD
MODE SW SETUP