Panasonic WJ-SX 150 User Manual

50

■

This unit has two setting procedures.
The one is SETUP MENU, which is the unit's on-screen dis-
play (OSD).
The other is WJ-SX150 Administrator Console, which oper-
ates on the PC.

• SETUP MENU (OSD)

The basic functions, which are essential for the operation,
are configurable. However, some items are not config-
urable. The settings about group sequences, operators and
schedules, etc.

• WJ-SX150 Administrator Console (PC)

All the functions of this unit are configurable. You need a
PC to use WJ-SX150 Administrator Console.
Refer to p. 64 WJ-SX150 ADMINISTRATOR CONSOLE for
details of the platform and installation.

• To use WJ-SX150 Administrator Console, you need to

prepare a PC and a 9-pin D-sub cable.(Refer to p. 47.)

• When changing the configuration of WJ-SX150

Administrator Console, configuration data getting and
putting are necessary between the unit and PC to acti-
vate your configuration.

■

This chapter describes about configurable items.

●

SETUP MENU can configure tour sequences. WJ-SX150
Administrator Console can configure both of tour
sequences and group sequences.

• Tour sequence: Up to 16 tour sequences are config-

urable (16 steps per tour). 

• Group sequence: Tour sequences can be activated on

up to 4 monitors simultaneously (1 tour sequence per
monitor).

●

SETUP MENU can configure daylight saving time. WJ-
SX150 Administrator Console can configure timer event,
camera cleaning, and daylight saving time.

• Timer event: A sequence or spot mode can be activat-

ed on the regular time of every month, week or day.
Up to 30 timer events can be registered.

• Camera cleaning: Camera cleaning can be executed

on the regular time of every month, week or day.

• Daylight saving time: Daylight saving times for 20 years

are configurable.

●

The operation parameters when an alarm is input to the unit
are configurable.

• Alarm mode: The  operation mode activated along with

an alarm input is configurable. Sequence mode or hold
mode is selectable. Alarm mode can be set to OFF
when not using it.

• Alarm event: The event activated along with an alarm

input is assignable to each alarm input terminals. The
sequence number or spot camera is selectable for the
alarm event.

• Alarm input (Alarm port): The alarm polarity (N. O. or N.

C.) is assignable to each alarm input terminal. One of
16 terminals is assignable for time adjustment.

SETUP MENU (OSD)

WJ-SX150 Administrator Console (PC)

Sequence settings
 • Tour sequence
 • Group sequence

Schedule settings
 • Timer event 
 • Camera cleaning 
 • Daylight saving time

Alarm settings
 • Alarm mode 
 • Alarm event 
 • Alarm input/Alarm port

Operator settings
 • Operator registration
 • Level table 
 • Monitor select (Monitor selection) 
 • Auto login/logout (Auto log-in/log-out)

System settings
 • Clock (Time and date) *

1

 

 • Cable compensation 
 • Camera title
 • Data port *

2

Multiplxer board 
 • Recorder
 • Multiplexer *

3

 • Mux (Multiplxer camera title) *

3

 
Setup file operation
 • Put a file to SX150
 • Get a configuration data from the SX150

SX150 Admin Console Configuration 
 • File Open
 • Account Manager
 • Communication (Serial) port 

 • Camera manual cleaning ON/OFF

*

1

 WJ-SX150 Administrator Console can configure the 

display pattern.

*

2

 WJ-SX150 Administrator Console can configure the 

communication speed (baud rate) of the ports Data 1 to 4.

*

3

 These menus (or windows) appear only when the Multiplxer 

is installed in the unit.