Sun Microsystems 4500/3 User Manual
Chapter 2
The Cluster Platform 4500/3 System
19
c. From a terminal window on the Sun workstation, enter the following
command:
Note –
If the port is busy, refer to “Troubleshooting the Cluster Platform 4500/3
3. Configure the terminal concentrator device:
■
Power on the terminal concentrator.
■
Within 5 seconds, after power-on, press and release the
TEST
button.
The terminal concentrator undergoes a series of diagnostics tests that take
approximately 60 seconds to complete.
approximately 60 seconds to complete.
Following the diagnostics tests, the
tip
window of the administration workstation
should display:
# /usr/bin/tip hardwire
System Reset - Entering Monitor Mode
monitor::