Sun Microsystems 4500/3 User Manual

Chapter 2

The Cluster Platform 4500/3 System

Currently, only version 4 of the IP software is supported. Verify that IPv6 support is
disabled.

On this screen you should specify whether or not IPv6, the next

generation Internet Protocol, will be enabled on this machine.

Enabling IPv6 will have no effect if this machine is not on a

network that provides IPv6 service. IPv4 service will not be

affected if IPv6 is enabled.

> To make a selection, use the arrow keys to highlight the option

and press Return to mark it [X].

      Enable IPv6

      -----------

      [ ] Yes

      [X] No

> Confirm the following information.

If it is correct, press F2;

to change any information, press F4.

                    Networked: Yes

                     Use DHCP: No

    Primary network interface: eri0

                    Host name: sc3sconf1-ms

                   IP address: 192.212.87.38

                  Enable IPv6: No