Sun Microsystems 4500/3 User Manual
38
Cluster Platform 4500/3 User’s Guide • July 2001
36. When the management server reboots, log in as
root
user to start the terminal
concentrator customization.
▼
Starting the Cluster Console
1. Start cluster console windows for both cluster nodes by entering the following
command on the management server:
Note –
Replace the sc3sconf1 variable name displayed above with your cluster name.
When executing the
ccp(
1
)
command remotely, ensure that the
DISPLAY
shell
environment variable is set to the local hostname.
When the
/opt/SUNWcluster/bin/ccp
command is executed, the Cluster Control
Panel window displays (see F
sc3sconf1-ms console login: root
Password:
Last login: Thu Jan 4 15:40:24 on console
Jan 4 15:51:14 sc3sconf1-ms login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.8 Generic February 2000
Check the “Cluster Platform 4500/3 User’s Guide” (referred to in
the software as "Sun Cluster Standard Configuration User’s Guide,
Sun Enterprise E4500 Server and StorEdge T3 Array") for
instructions on how to set up the terminal concentrator.
Installed on this Management Server is the SunCluster Control Panel
and Sun StorEdge Component Manager 2.1 software. Once the terminal
concentrator is configured, you can produce console windows for
each cluster node and the StorEdge Management Console for the T3’s
by exporting your local DISPLAY variable and executing: ccp cluster
and esm_gui&
# /opt/SUNWcluster/bin/ccp
cluster