Sony 2140847 User Manual
AirLink Helix User Guide
20
2140847
WAN/Cellular
WAN/cellular status indicates specific information about the cellular connection
including IP address and how much data has been used.
including IP address and how much data has been used.
Figure 5-2: ACEmanager: Status - WAN/Cellular
Table 5-1: Status: Home
Command
Description
Backhaul mode
WAN backhaul mode : cellular, failover, passthrough.
Phone Number
This is the phone number that is programmed in to your device.
Current WAN IP
address
This can be the IP address of the cellular modem, if it is being used or the IP address of
WAN port if WAN Failover has switched to the Ethernet connection.
WAN port if WAN Failover has switched to the Ethernet connection.
Network State
Not Connected or Connected. Current state of the cellular radio.
RSSI
Signal strength of the cellular signal. The lower the number, the better the signal strength.
The exact numbers vary between cellular carriers. However, -40dBm means Helix has a
significantly stronger coverage area than when it is -70dBm.
The exact numbers vary between cellular carriers. However, -40dBm means Helix has a
significantly stronger coverage area than when it is -70dBm.
Network Operator
Indicates the network the modem is currently on.
Network Service Type
The type of service being used by the modem, for example EV-DO Rev A or HSPA.
ALEOS Software
Version
Software version of the ALEOS build.
Channel
The current active CDMA/GSM channel number.
Modem Name
Name of the modem.
Command
Description
Cellular IP Address
Cellular WAN IP Address.
Ethernet IP Address
Ethernet IP Address. This is present in WAN failover mode only.
WAN Link
WAN Link defaults to cellular. In WAN failover mode this can be either cellular or Ethernet.
ESN/EID/IMEA
The cellular radio module's unique identification number or electronic serial number (ESN
or IMEA).
or IMEA).