Sony 2140847 User Manual

Page of 63
Preface
Rev 3.0D  May.10
3
Important 
Notice
Due to the nature of wireless communications, transmission and reception of data 
can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or 
totally lost. Although significant delays or losses of data are rare when wireless 
devices such as the Sierra Wireless AirLink Product Name are used in a normal 
manner with a well-constructed network, the Sierra Wireless AirLink Product 
Name should not be used in situations where failure to transmit or receive data 
could result in damage of any kind to the user or any other party, including but not 
limited to personal injury, death, or loss of property. Sierra Wireless accepts no 
responsibility for damages of any kind resulting from delays or errors in data 
transmitted or received using the Sierra Wireless AirLink Product Name, or for 
failure of the Sierra Wireless AirLink Product Name to transmit or receive such 
data.
Safety and 
Hazards
READ ALL SAFETY AND OPERATING INSTRUCTIONS BEFORE OPERATING 
THE PRODUCT.
Warning:
FOR INDOOR USE ONLY. TO PREVENT FIRE OR SHOCK HAZARD, DO 
NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. DO NOT EXPOSE THIS 
PRODUCT TO DRIPPING OR SPLASHING. NO OBJECTS FILLED WITH LIQUIDS, 
SUCH AS VASES, SHALL BE PLACED ON THE DEVICE. 
Caution:
DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER 
THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING 
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. REFER ALL SERVICING 
TO QUALIFIED SERVICE PERSONNEL.
Caution:
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE 
PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY 
TO OPERATE THE EQUIPMENT.
It is recommended that the customer install an AC surge arrestor in the AC outlet 
to which this device is connected. This is to avoid damaging the equipment by 
local lightning strikes and other electrical surges.
Only use twisted pair Ethernet cables with RJ-45 connectors that conform to FCC 
standards in the Ethernet ports. Do not plug a telephone cable (RJ-11) into any 
Ethernet (RJ-45) port on your device.
Installation of this product must be in accordance with national wiring codes.
To clean, wipe this device with a clean, dry cloth. Never use cleaning fluid or 
similar chemicals. Do not spray cleaners directly on the unit or use forced air to 
remove dust.
Do not use attachments not recommended by the device manufacturer.
To avoid injury from falling equipment, do not place this product on an unstable 
surface.
This device should be situated away from heat sources and products that produce 
heat.