Siemens SX541 WLAN dsl User Manual
108
Configuring the Advanced Settings
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Sc
hablone 2005_05_02
ì
If your service provider supports the function, you can have the caller's number dis-
played via Display number of the caller (CLIP).
played via Display number of the caller (CLIP).
ì
Select Hide own number for outgoing calls (CLIR) if you want to hide the number
of this extension for outgoing calls.
of this extension for outgoing calls.
ì
Different dial tones for fixed line and VoIP: If you activate this function, a different
dialing tone is used for Internet telephony than for fixed network telephony. This
means you can hear immediately when dialing a number whether you are calling via
the Internet or via the fixed network.
dialing tone is used for Internet telephony than for fixed network telephony. This
means you can hear immediately when dialing a number whether you are calling via
the Internet or via the fixed network.
ì
Leave the default setting for Hook flash time or change the data.
ì
Select the appropriate settings for extension 2.
ì
Click OK to apply the settings.
Dialing Plans
On this screen you can
u
specify for certain phone numbers or prefixes whether they are to be dialled via the
Internet or the fixed network,
Internet or the fixed network,
u
enter a call-by-call provider for the fixed network,
u
block phone numbers or prefixes.
ì
To make these settings, select the menu entry Dialing Plans in the Telephony
menu.
menu.
Please remember:
u
If you do not specify dialing rules, the default settings apply. All other calls are
made via the Internet. If, however, you press the * key twice before dialing the
number on the phone, then the call will always be made via the fixed network.
Switching over takes a little time. For automatic dialing, insert a pause after
the **. Please refer to the user‘s guide of your telephone, how to insert a
pause. You should therefore press: * key, * key, key for pause and then the keys
for the required phone number.
made via the Internet. If, however, you press the * key twice before dialing the
number on the phone, then the call will always be made via the fixed network.
Switching over takes a little time. For automatic dialing, insert a pause after
the **. Please refer to the user‘s guide of your telephone, how to insert a
pause. You should therefore press: * key, * key, key for pause and then the keys
for the required phone number.
u
If no VoIP (Internet telephony) is set, you will always make calls via the fixed
network and the dialing rules will not apply.
network and the dialing rules will not apply.
u
If VoIP is set, then – depending on your provider – a call-by-call number is pre-
set for fixed network calls.
Please check these dialing rules and amend them if you have agreed special
phone tariffs with another provider.
set for fixed network calls.
Please check these dialing rules and amend them if you have agreed special
phone tariffs with another provider.
u
If there is a power failure or if you have switched off the Gigaset SX541 WLAN
dsl, you can only make calls using a phone connected to the Phone 1 socket.
The dialing rules will not apply in this case.
dsl, you can only make calls using a phone connected to the Phone 1 socket.
The dialing rules will not apply in this case.