Siemens SX541 WLAN dsl User Manual

Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619        / configure_router.fm / 21.07.2005

Sc

hablone 2005_05_02

If you have configured your Gigaset SX541 WLAN dsl using the two wizards, you have 
also already configured the 

 connection (Internet access). You can check or change 

these settings in the Internet menu. 
This menu also offers you a wide range of possibilities for security settings and limiting 
access to the Internet as well as for providing your own services on the Internet.
Via the Internet menu you can

u

select or deselect the Internet connection and edit the virtual connection parame-
ters (see below),

u

check and edit the Internet configuration of the Gigaset SX541 WLAN dsl 
(see below),

u

enter the PC's registered MAC address for Internet access (WAN interface) 
(for cloning the MAC address, see page 75),

u

make DNS server settings (page 74),

u

configure time and volume control for using the Internet (see page 76),

u

protect your network against unauthorised access from outside (firewall) and limit 
or block access to Internet sites (see page 78),

u

provide your own services on the Internet (NAT, see page 85),

u

set up dynamic DNS (see page 90),

u

define QoS properties (priorities for data transfer) (see page 92).

On this screen you can select or deselect the Internet connection for your Gigaset SX541 
WLAN dsl and edit the virtual connection parameters.

ì

Select Internet in the Advanced Settings menu.