Siemens ADSL 500 User Manual
Chapter 3: Configuration
LAN Configuration
For the LAN Configuration, there are two types that you have to know, IP Address and DHCP Server.
IP Address
LAN Configuration allows you to define the public/private IP address over the LAN interface.
LAN Configuration allows you to define the public/private IP address over the LAN interface.
Primary IP Address: Private IP address is used for the purpose of system management. When it is assigned, PC
on the LAN is able to use the specified address to access this ADSL Router through
Ethernet.
Ethernet.
By default, the IP address and subnet mask is 192.168.1.1 and 255.255.255.0 respectively.
This will give you an available range of IP addresses from 192.168.1.2 to 192.168.1.254
that can be assigned to PCs on the LAN.
This will give you an available range of IP addresses from 192.168.1.2 to 192.168.1.254
that can be assigned to PCs on the LAN.
Secondary IP Address: If you applied for multiple IP address from your ISP, you will have a range of IP address for
the ADSL Router and other network devices on the LAN. You can fill in the IP address
assigned by ISP in the public IP address field.
assigned by ISP in the public IP address field.
DHCP Server
This page allows you to enable DHCP server on LAN interface and then your router can assign IP addresses to those
PCs connected to your router.
This page allows you to enable DHCP server on LAN interface and then your router can assign IP addresses to those
PCs connected to your router.
43