Siemens 4100 User Manual
4
5
Step 2
>
Ethernet Installation
Connect the SpeedStream
®
Device
1. Connect the straight-
through Ethernet cable
(RJ-45) to the Ethernet
port on the SpeedStream
®
device (yellow port).
2. Connect the other end
of the straight-through
Ethernet cable (RJ-45)
to the Ethernet port
on your computer.
3. Plug the DSL cable (RJ-11)
into the DSL port on the
SpeedStream
®
device
(gray port).
4. Plug the other end of
the DSL cable (RJ-11)
into the phone jack.
5. Plug the power adapter
into the power outlet
and SpeedStream
®
device
(black port).
6. Ensure the SpeedStream
®
device is powered on (power
switch located on right side
of back panel).
Install Ethernet Adapter
You will need to install an Ethernet
adapter if your computer does not
already have one installed. Refer to
your Ethernet adapter manufacturer’s
documentation for complete
installation instructions.
adapter if your computer does not
already have one installed. Refer to
your Ethernet adapter manufacturer’s
documentation for complete
installation instructions.
Internet connection
Ethernet connection
to computer RJ-45
Straight-through
Ethernet cable
to computer RJ-45
Straight-through
Ethernet cable
Optional:
use crossover
(Xover) cable when
connecting to a hub
or switch without an
“uplink” port
use crossover
(Xover) cable when
connecting to a hub
or switch without an
“uplink” port
Power supply
Hub
RJ-11 DSL cable
1
2
3
4
6
5
Step 3
>
PC Configuration Procedures
Windows Configuration
In order to setup the SpeedStream
®
device,
your PC must first be configured to obtain
an IP address from a DHCP server. Follow the
procedure below:
Note: The following procedures cover configuration of a PC
running Windows
running Windows
®
XP. Please refer to the User Guide on the
CD-ROM for help configuring other operating systems.
1. Click
Start > Control Panel.
2. Double-click the
Network
Connections icon.
3. Double-click your
Network Card.
4. Click
Properties.
5. Select
Internet Protocol (TCP/IP).
6. Click
Properties.
7. Select
Obtain an IP address
automatically.
8. Select
Obtain DNS server address
automatically.
9. Click
OK and exit out of the Control Panel.
10. Configure Internet Access using the
procedure that follows.
Internet Access
Next, make sure your PC will use the
SpeedStream
®
device (and not Dial-Up
Networking) when connecting to the
Internet. Follow the procedure below:
1. Click
Start > Control Panel.
2. Double-click the
Internet Options icon.
3. Click the
Connections tab.
4. Click
Setup.
5. Click
Next.
6. Click
Connect to the Internet.
7. Click
Next.
8. Click
Setup my connection manually.
9. Click
Next.
10. Select
Connect using a broadband
connection that is always on.
11. Click
Next.
12. Click
Finish.
13. If you have a router, configure the router
using the Router Configuration procedure
that follows.
Router Configuration
Windows Me and XP users: If you have Universal
Plug and Play (UPnP) enabled, Windows may
detect the SpeedStream
®
device upon startup
and provide a shortcut to the device on the
desktop or system task tray. The icon will be
labeled as “Residential Gateway.” Double-click
the icon and skip to step 3.
1. Start your Web browser.
2. In the Address box, enter the following:
http://speedstream
3. When prompted for a username and
password, type
admin for the password
only (username is not required).
4. Click
Login and enter the username
and password provided by your
service provider.
5. Click
Save.
6. If additional configuration is desired,
select
Setup to configure DHCP, firewall
settings, security options, and also to
view status and statistical information.
Note: If your Service Provider requires you to use separate
PPPoE client software, discontinue use of this software.
The SpeedStream
PPPoE client software, discontinue use of this software.
The SpeedStream
®
device will negotiate the PPPoE logon
to your service provider’s network.
Congratulations! You have
completed the installation of
your SpeedStream
®
device.