Siemens 5935 User Manual

Quality of Service (QoS) actively manages network resources to sustain service levels for priority applications. 
To configure QoS:

1. Click QoS in the left navigation pane of the Router Information page. This displays the QoS Configuration 

page. This page shows the current settings as well as provides a means to change the current settings.

2. Select one of the following from QoS Status to enable or disable QoS:

On: QoS will forward packets and set diffserv marking based on user defined mapping rules and 
enabled QoS policies. 

Off: QoS will forward packets based on pre-defined mapping rules and enabled QoS policies.

3. To enable or disable marking of the Differentiated Services field of the IP header, select one of the 

following from DiffServ Status:

On: QoS will mark the DiffServ field according to the QoS Policies and pre-defined behavior. 

Off: DiffServ is not marked; this is DiffServ pass through. 

4. Assign weight values to four different priorities. This can be a number between 1 and 255. 

5. Click Apply.

6.

.