Siemens SS2524 User Manual
SpeedStream Powerline Wireless Router User Guide
4
Physical Details
Front Panel LEDs
Figure 2: Front Panel
Power
On - Normal operation.
Off - No power
Status
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up, or when the Firmware is
being upgraded.
being upgraded.
LAN
(1, 2, 3, 4)
For each LAN port, there are 2 LEDs
•
Link/Act
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub)
port.
•
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
•
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN
Flashing - data is being transmitted or received via the WAN port.
Off - no data is being transferred.
Wireless
On - Wireless connection available; Wireless Access Point is ready for
use.
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
point. Data includes "network traffic" as well as user data.
Powerline
On - Powerline connection is available.
Off - No Powerline connection available.
Flashing - Data is being transmitted or received via the Powerline inter-
face. Data includes "network traffic" as well as user data.
face. Data includes "network traffic" as well as user data.