Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

124                                                                         A50010-Y3-C150-2-7619 

In hiD 6615 S223/S323, the administrator can enable and disable basic TLV by selecting 
it. To enable basic TLV by selecting it, use the following command. 

 enable PORTS {portdescrip-

 | sysname | sysdescription | 

} 

Selects basic TLV that is sent in the port. 
portdescription: Port’s description 
syscap: System’s capablility 
sysname: System’s name 
sysdescription: System’s description 

  disable  PORTS  {portde-

 | sysname | sysde-

 | syscap} 

Bridge 

Disables basic TLV configured as sent in the port. 

 

In hiD 6615 S223/S323, it is possible to configure the interval time and times of sending 
LLDP message. To configure the interval time and times of LLDP message, use the fol-
lowing command. 

 <5-32768> 

Configures the interval of sending LLDP message. The 
unit is second. 

 <2-10> 

Bridge 

Configures the periodic times of LLDP message. 

 

Default for sending LLDP message is 4 times in every 30 seconds. 

 

In hiD 6615 S223/S323, the administrator can configure the interval time of enabling 
LLDP frame after configuring LLDP operation type. To configure the interval time of ena-
bling LLDP frame after configuring LLDP operation type, use the following command. 

 <1-10> 

Bridge 

Configures the interval time of enabling LLDP frame 
from the time of configuring not to process LLDP 
frame. (default: 2) 

 

To configure delay time of transmitting LLDP frame, use the following command. 

 <1-8192> 

Bridge 

Configures delay time of transmitting LLDP frame. 
(default: 2)