Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         129 

There are two ways to compare with the threshold: absolute comparison and delta com-
parison. 

•

 

: Comparing sample data with the threshold at configured in-

 

terval, if the data is more than the threshold or less than it, alarm is occurred 

•

 

: Comparing difference between current data and the latest data 

 

with the threshold, if the data is more than the threshold or less than it, alarm is oc-

 curred. 

You need to open RMON Alarm Configuration mode first to configure RMON alarm. 

 <1-65535> 

Global 

Opens RMON Alarm Configuration mode. 
1-65535: index number 

 

The following is an example of listing available commands on RMON-alarm Configuration 
mode. 

SWITCH(config)# rmon-alarm 1 

SWITCH(config-rmonalarm[1])# ? 

RMON alarm configuration commands: 

  active 

Activate  the  event 

  do 

To run exec commands in config mode 

  exit 

End current mode and down to previous mode 

  falling-event 

Associate the falling threshold with an existing RMON 

      

event 

  falling-threshold 

Define the falling threshold 

  help 

Description of the interactive help system 

  owner 

Assign the owner who define and is using the history 

   

resources 

  rising-event 

Associate the rising threshold with an existing RMON 

        

event 

  rising-threshold 

Define the rising threshold 

  sample-interval 

Specify the sampling interval for RMON alarm 

  sample-type 

Define the sampling type 

  sample-variable 

Define the MIB Object for sample variable 

  show 

Show running system information 

  startup-type 

Define startup alarm type (default : rising) 

  write 

Write running configuration to memory or terminal 

SWITCH(config-rmonalarm[1])# 

 

User needs to configure RMON alarm and identify subject using many kinds of data from 
alarm. To identify subject of alarm, use the following command. 

 NAME RMON 

Identifies subject using related data, enter the name 
(max. 32 characters).