Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         133 

To configure community for trap message transmission, use the following command. 

 NAME RMON 

Configures password for trap message transmission 
right. 
NAME: community name 

 

It is possible to describe event briefly when event is happened. However, the description 
will not be automatically made. Thus administrator should make the description. 

To make a description about event, use the following command. 

 DESCRIPTION RMON 

Describes the event. 
Max: 126 character 

 

You need to configure event and identify subject using various data from event. To identify 
subject of RMON event, use the following command. 

 NAME RMON 

Identifies subject of event. You can use maximum 126 
characters and this subject should be same with the 
subject of RMON alarm. 

 

When RMON event happened, you need to configure event type to arrange where to 
send event.   

To configure event type, use the following command. 

Configures event type as log type. Event of log type is 
sent to the place where the log file is made. 

Configures event type as trap type. Event of trap type 
is sent to SNMP administrator and PC. 

Configures event type as both log type and trap type. 

RMON 

Configures none event type. 

 

 

After finishing all configurations, you should activate RMON event. To activate RMON 
event, use the following command.