Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         151 

For the hiD 6615 S223/S323, you need to open Admin Access Rule Configuration mode 
first. After opening Admin Access  Rule Configuration mode, the prompt changes from 
SWITCH(config)# to SWITCH(config-admin-rule[NAME])#. 

To open Rule Configuration mode, use the following command. 

 NAME create admin Global 

Opens  Admin Access Rule Configuration mode, enter 
rule name. 

 

After opening Admin Access Rule Configuration mode, a rule can be configured by user. 
The rule priority, packet classification and rule action(s) can be configured for each rule. 

1.  The rule name must be unique. Its size is limited to 63 significant characters. 
2.  The order in which the following configuration commands will be entered is arbitrary. 
3.  The configuration of a rule being configured can be changed as often as wanted 
 

(inclusive rule type) until the command, apply, will be entered. 

4.  Use the command, show rule-profile, to display the configuration entered up to now.   

If rules that are more than two match the same packet then the rule having a higher prior-
ity will be processed first. 

To set a priority for an admin access rule, use the following command. 

  {low | medium | high | 

} 

Admin-rule

Sets a priority for a rule. 

(Defaul: low)