Siemens S223 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
160 A50010-Y3-C150-2-7619
To display the configuration of port security, use the following command.
Command Mode
Description
show port security
[PORTS]
Bridge
Shows port security on the port.
This is an example of configuring port security on port 7.
SWITCH(config)# bridge
SWITCH(bridge)# port security 7
SWITCH(bridge)# port security 7 maximum 10000
SWITCH(bridge)# port security 7 violation protect
SWITCH(bridge)# port security 7 mac-address 00:02:a5:74:9b:17 vlan 1
SWITCH(bridge)# show port security 7
========================================================================
port security violation aging type static maximum current
========================================================================
7 enabled protect - absolute - 10000 1
========================================================================
port vlan secure-mac-addr status in use
========================================================================
7 1 00:02:a5:74:9b:17 static -
SWITCH(bridge)# no port security 7 maximum
SWITCH(bridge)# no port security 7 violation
SWITCH(bridge)# show port security 7
========================================================================
port security violation aging type static maximum current
========================================================================
7 enabled shutdown - absolute - 1 0
========================================================================
port vlan secure-mac-addr status in use
========================================================================
SWITCH(bridge)#
7.10.2 Port
Security
Aging
Port security aging is to set the aging time for all secure addresses on a port. Use this
feature to remove and add PCs on a secure port without manually deleting the existing
secure MAC addresses while still limiting the number of secure addresses on a port.
feature to remove and add PCs on a secure port without manually deleting the existing
secure MAC addresses while still limiting the number of secure addresses on a port.
Command Mode
Description
port security
PORTS aging
static
Enables aging for configured secure addresses.
port security
PORTS aging time
<1-1440>
Configures aging time in minutes for the port. All the
secure addresses age out exactly after the time.
secure addresses age out exactly after the time.
port security
PORTS aging type
{absolute | inactivity}
Bridge
Configures aging type.
•
absolute
all the secure addresses on this port age out exactly after the time (min-
utes) specified lapses and are removed from the secure address list.
•
inactivity
the secure addresses on this port age out only if there is no data traffic
from the secure source addresses for the specified time period.