Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         233 

To configure an authentication password for security of Virtual Router, use the following 
command on VRRP configuration mode. 

 

Configures an authentication password. 

VRRP 

Deletes a configured authentication password. 

 

Authentication password can be configured with maximum 7 digits. 
 

The following is an example of configuring Authentication password in Virtual Router as 
network and showing it. 

SWITCH(config-vrrp)# authentication clear_text network 

SWITCH(config-vrrp)# show running-config 

Building configuration... 

(Omitted) 

vrrp default 1 

 authentication clear_text network 

 associate  10.0.0.5 

no snmp 

SWITCH(config-vrrp)# 

 

Preempt is a function that an added device with the highest Priority user gave is auto-
matically configured as Master Router without rebooting or specific configuration when 
you add an other device after Virtual Router is configured. 

To configure Preempt, use the following command on VRRP configuration mode. 

 {enable | disable} 

VRRP 

Enables or disables Preempt. (default: enable) 

 

The following is an example of disabling Preempt. 

SWITCH(config-vrrp)# preempt disable 

SWITCH(config-vrrp)# exit 

SWITCH(config)# show vrrp 

default - virtual router 1 

---------------------------------------------- 

state                          master 

virtual  mac  address            00:00:5E:00:01:01 

advertisement  interval         1  sec 

preemption                     disabled 

priority                       100 

master  down  interval           3.624  sec 

 [1] associate address : 10.0.0.5 

SWITCH(config)#