Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         245 

To display a list of valid or invalid (blocked) IP addresses, use the following command. 

Shows a list of valid IP addresses. 

Enable 

Global 
Bridge 

Shows a list of invalid (discarded) IP addresses. 

 

To delete a list of invalid (blocked) IP addresses, use the following command. 

Enable 

Global 
Bridge 

Deletes a list of invalid (discarded) IP addresses. 

 

The DHCP server may assign plural IP addresses to a single DHCP client in case of plu-
ral DHCP requests from the DHCP client which has the same hardware address. Some 
network devices may need plural IP addresses, but most DHCP clients like personal 
computers need only a single IP address. In this case, you can configure the hiD 6615 
S223/S323 to prohibit assigning plural IP addresses to a single DHCP client. 

To prohibit assigning plural IP addresses to a DHCP client, use the following command. 

Prohibits assigning plural IP addresses. 

Global 

Permits assigning plural IP addresses. 

 

To allow a DHCP server to ignore received bootstrap protocol (BOOTP) request packets, 
use the following command. 

Ignores BOOTP request packets. 

Global 

Permits BOOTP request packets. 

 

To display DHCP packet statistics of the DHCP server, use the following command. 

Shows DHCP packet statistics. 

Enable 

Global 
Bridge 

Deletes collected DHCP packet statistics.