Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         275 

  {broadcast | 

 | dlf} [PORTS] 

Bridge 

Disables broadcast, multicast, or DLF storm control 
respectively. 

 

To display a configuration of storm control, use the following command. 

Enable 

Global 
Bridge 

Displays storm control configuration. 

 

The packet range that can be capable to accept is from 64 bytes to 1518 bytes. Therefore, 
packets not between these ranges will not be taken. However, the hiD 6615 S223/S323 
can accept Jumbo-frame larger than 1518 bytes through user’s configuration. 

To configure to accept Jumbo-frame larger than 1518 bytes, use the following command. 

<1518-

9000> 

Bridge 

Configures to accept jumbo-frame between specified 
ranges. 

1518-9000: Max packet length 

 

To disable configuration to accept Jumbo-frame, use the following command. 

 PORTS  

Bridge 

Disables configuration to accept jumbo-frame on speci-
fied port. 

 

To display the configuration of Jumbo-frame, use the following command. 

Enable  

Global 
Bridge 

Shows a configuration of jumbo frame. 

 

The following is an example of configuration to accept Jumbo-frame under 2200 bytes in 
port 1~10. 

SWITCH# configure terminal 

SWITCH(config)# bridge 

SWITCH(bridge)# jumbo-frame 1-10 2200 

SWITCH(bridge)# show jumbo-frame 

           Name : Current/Default 

         port01  :    2200/   1518