Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

282                                                                         A50010-Y3-C150-2-7619 

L2 and L3 Join information about Multicast Group used to apply on the chipset without 
Multicast Stream, which makes dissatisfaction for Maximum Multicast Entry. Multicast Ag-
ing is to optimize Multicast Entry management using Multicast L2 Aging. When Multicast 
Stream comes in, L2 filtering port (igmp snooping, pim snooping) would be written on the 
chip. In addition, verify the hitbit about Entry after the Aging time to reset the aging time or 
delete Entry to manage the Multicast Entry efficiently.   

To configure the multicast againg, use the following command. 

 < 10-

21474830> 

Configures Aging tiem for Multicast Stream 
(Default:300sec) 

 <256-

65535> 

Configures Maximun Multicast Stream for Aging 
(Default:5000) 

Global 

Restores it as a default 

 

To delete Muticast Stream Entry that has done the Aging, use the following command.   

 {vlan VLAN} 

Deletes Multicast Stream Entry after Aging per vlan or 
all 

 VLAN group 

 source A.B.C.D 

Global 

Deletes Multicast Stream Entry after Aging per vlan or 
group, source 

 

To display about Againg information, use the following command. 

Displays L2 Aging information 
(aging-time, aging-limit information) 

{vlan VID | group A.B.C.D} 
[mac-based | detail] 

Displays L2 Aging information   

{vlan VID | group A.B.C.D} 
[detail] 

Displays L3 Aging Entry information as Input interface 
(RPF) and Output Interface 
Detail: displays input/output Port for each interface 
and user for each port 

 

{reserved | dstuser} 

Enable 

Global 
Bridge 

Displays reserved information and destination user 
information as a hidden command