Siemens S223 User Manual

Page of 381
User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 
A50010-Y3-C150-2-7619                                                                         295 
To disable the port where multicast router is connected, use the following command. 
Command Mode 
Description 
no ip igmp snooping mrouter 
port
 {PORTS cpu
Disables the port where multicast router is connected 
on the system 
no ip igmp snooping vlan
 
VLANS
  mrouter port  {PORTS  
cpu
Global 
Disables the port where multicast router is connected 
on a VLAN interface. 
 
Mrouter Port Learning Method 
For the hiD 6615 S323, multicast-capable router ports are added to the forwarding table 
for every Layer 2 multicast entry. The switch learns such ports through snooping on PIM 
packets. The switch snoops on PIM packets on all VLANs. 
To configure Mrouter port learning method, use the following commands. 
Command Mode 
Description 
ip igmp snooping mrouter learn 
pim 
Configures the mrouter port learning method on the 
system. 
ip igmp snooping vlan
  VLANS 
mrouter learn pim
 
Configures the mrouter port learning method on a 
VLAN interface. 
no ip igmp snooping mrouter 
learn pim 
Disables the mrouter port learning method on the sys-
tem. 
no ip igmp snooping vlan
 
VLANS
 mrouter learn pim 
Global 
Disables the mrouter port learning method on a VLAN 
interface. 
 
Displaying Mrouter Configuration 
To display IGMP snooping mrouter configuration, use the following command. 
Command Mode 
Description 
show ip igmp snooping mrouter
Shows the mrouter configuration on the system. 
show ip igmp snooping vlan
 
VLANS
 mrouter 
Enable 
Global 
Bridge 
Shows the mrouter configuration and detail information 
on a VLAN interface. 
 
9.2.5.6 
Multicast TCN Flooding 
An IGMP snooping-disabled switch does not flood multicast traffic to all ports in a VLAN 
when a spanning-tree Topology Change Notification (TCN) is received. A topology can 
change in a VLAN and it may invalidate previously learned IGMP snooping information. A 
host that was on one port before the topology change may move to another port after the 
topology change. The hiD 6615 S223/S323 switch helps to deliver multicast traffic is de-
livered to all multicast receivers in that VLAN when the topology changes. When the 
spanning tree protocol is running in a VLAN, a spanning tree topology change notification 
(TCN) is issued by the root switch in the VLAN.