Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         301 

dropped, and the port is not allowed to receive IP multicast traffic from that group. If the 
filtering action permits access to the multicast group, the IGMP report from the port is 
forwarded for normal processing. 

IGMP filtering controls only group specific query and membership reports, including join 
and leave reports. It does not control general IGMP queries. IGMP filtering has no rela-
tionship with the function that directs the forwarding of IP multicast traffic. 

 

You can create or modify the IGMP profile to be used for filtering IGMP join requests from 
a port. The system prompt will be changed to SWITCH(config-igmp-profile[N])# from 
SWITCH(config)#. 

 <1-2147483647> 

Global 

Configures IGMP profile. 

 

To delete the created IGMP profile, use the no ip igmp profile <1-2147483647> com-
mand on global mode. 

To display the IGMP profile, use the following command. 

 [<1-2147483647>] 

Enable 

Global 
Bridge 

Shows IGMP profile. 

 

Configure the action to permit or deny access to the IP multicast address using the follow-
ing command. 

{permit | deny} 

IGMP 

Profile 

Configures the action of IGMP profile. 

 

Configure the group range of IGMP Profile using the following command. 

 A.B.C.D [A.B.C.D] 

Configures a group range. 
A.B.C.D: low IP multicast address 
A.B.C.D: high IP multicast address 

 A.B.C.D [A.B.C.D] 

IGMP 

Profile 

Deletes a configured group range.