Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         311 

To configure the registration suppression time, use the following command. 

 

<1-65535> 

Configures the time of registration suppression. 
1-65535: The register suppression on time in seconds.

Global 

Disables the registration suppression time. 

 

One network may include different multicast groups and routers that are not members of 
multicast group. Therefore it can happen that routers, which are members of another 
network or not members of multicast group, apply for RP and transmit candidate-RP 
message. 

To prevent this case, user can block candidate-RP message of another router by making 
only candidate-RP in multicast group communicate. In order to block candidate-RP mes-
sage from routers which are not members, perform the below tasks. 

 

Step 1 
Configure filtering out multicast sources. 

{<100-

199> | <2000-2699> | ACCESS-

} 

Global 

Configures multicast source filtering function. 
100-199: IP extended access-list 
2000-2699: IP extended access list (expanded range) 
ACCESS-LIST: IP named Standard Access List 

 

Step 2 
Allow or deny only the transmitted packets by routers that exchange candidate-RP mes-
sage. 

{<100-199> | <2000-

2699>} {deny | permit}  ip 
{A.B.C.D | any} 

Global 

Configures multicast source filtering function. 
100-199: IP extended access list 
2000-2699: IP extended access list (expanded range) 
A.B.C.D: address to match 

 

To delete the above configuration, use the following command. 

Global 

Releases blocked packet. 

 

To configure the source IP address of Register packets sent by DR, overriding the default 
source IP address, use ip pim register-source command. The configured address must 
be a reachable address to be used by the RP to send corresponding Register-Stop mes-