Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

318                                                                         A50010-Y3-C150-2-7619 

 

When configuring BGP, you can select BGP configuration type between standard BGP 
and ZebOS BGP for the hiD 6615 S323. 

The standard BGP is one of the general BGP configuration type, which includes the fol-
lowing restrictions. 

•

 

 

 

You should send the community information or message to neighbors directly using 

 the 

 {A.B.C.D | WORD} send-community command. 

•

 

 

 

Standard configuration type does not support a synchronization between IGP and 

 

eBGP. In this type, BGP network disables IGP synchronization in BGP by default.   

•

 

 

 

Standard configuration type does not support auto summary feature. By default, the 

 

system disables the automatic network number summarization. 

 

The ZebOS type requires no specific configuration for sending out BGP community and 
extended community attributes. ZebOS type is the default for the hiD 6615 S323. 

To select configuration type of the BGP router, use the following command. 

  {standard  |  ze-

} 

Sets the BGP configuration type between standard and 
ZebOS. 

Global 

Deletes the recent BGP configuration type and returns 
to default. 

 

 

To define an AS number and open Router Configuration mode, use the following com-
mand. 

 <1-65535> 

Global 

Assigns AS number to configure BGP routing and 
opens Router Configuration mode. 
1-65535: AS number