Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         331 

  GROUP 

  GROUP 

{unicast | multicast} out 

Resets the session for all members of specified peer 
group. 
GROUP: peer group name 
out: clears outgoing advertised routes. 
unicast | multicast: address family modifier 

  GROUP 

[in | out] 

  GROUP 

{unicast | multicast} soft [in 

| out] 

Global 

Resets the route information only while the session is 
possible for all members of specified peer group. Apply 
the route either incoming or outgoing routes. 
GROUP: peer group name 

 

BGP network information or configurations provided can be used to determine resource 
utilization and enable BGP troubleshooting functions to solve network problems.   

To see the configurations involved in BGP routing protocol, use the following command.   

 

[ipv4  {unicast  | 

}] summary 

Enable 

Global 

Shows the summarized network status of BGP 
neighboring routers. 

 

To show detailed information on BGP neighbor router’s session, use the following com-
mand. 

 

{unicast | mul-

} neighbors 

Shows general information on BGP neighbor connec-
tions of all neighboring routers. 

 

{unicast | mul-

} neighbors NEIGHBOR-IP 

Shows information of a specified neighbor router by its 
IP address. 
NEIGHBOR-IP: neighbor router’ s IP address 

 

 advertised-routes

{unicast | mul-

} neighbors NEIGHBOR-IP 

The  advertised-routes option displays all the routes 
the router has advertised to the neighbor. 

 

  received prefix-

{unicast | mul-

} neighbors NEIGHBOR-IP 

Enable 

Global 

Displays all received routes from neighbor router, both 
accepted and rejected.