Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

364                                                                         A50010-Y3-C150-2-7619 

Receives RIP v1 type packet only from the interface. 

Receives RIP v2 type packet only from the interface. 

Interface 

Receives both RIP v1 and RIP v2 type packets from 
the interface. 

 

To delete the configuration that receives RIP version packet from the interface, use the 
following command. 

Deletes the configuration of RIP v1 type packet for 
helping them be received from the interface. 

Deletes the configuration of RIP v2 type packet for 
helping them to be received from interface. 

Interface 

Deletes the configuration of both RIP v1 and RIP v2 
type packets for helping them to be received from the 
interface. 

 

This feature is provided only by Siemens’ route command creates static route available 
only for RIP. If you are not familiar with RIP protocol, you would better use redistribute 
static

 command. 

 A.B.C.D/M 

Creates suitable static route within RIP environment 
only. 
A.B.C.D/M: IP prefix 

 A.B.C.D/M 

Router 

Deletes this static route established by route com-
mand. 

 

The hiD 6615 S323 can redistribute the routing information from a source route entry into 
the RIP tables. For example, you can instruct the router to re-advertise connected, kernel, 
or static routes as well as other routes established by routing protocol. This capability ap-
plies to all the IP-based routing protocols. 

 

 

 

 

 

To redistribute routing information from a source route entry into the RIP table, use the 
following command.