Siemens S223 User Manual

UMN:CLI User Manual

SURPASS hiD 6615 S223/S323 R1.5

376 A50010-Y3-C150-2-7619

Step 3

Download the new system software via TFTP using the following command.

Command Mode

Description

load

{os1 | os2} A.B.C.D FILE-

NAME

Boot

Downloads the system software.
os1 | os2: the area where the system software is stored
A.B.C.D: TFTP server address
FILENAME: system software file name

To verify the system software in the system, use the following command.

Command Mode

Description

flashinfo

Boot

Shows the system software in the system.

To upgrade the system software in the boot mode, TFTP server must be set up first. Us-
ing the load command, the system will download the new system software from the
server.

The following is an example of upgrading the system software stored in os1 in the boot
mode.

Boot> load os1 10.27.41.82 V5212G.3.18.x

TFTP from server 10.27.41.82; our IP address is 10.27.41.83

Filename 'V5212G.3.18.x'.

Load address: 0xffffe0

Loading: #####################################################################

#####################################################################

(Omitted)

#####################################################################

####

done

Bytes transferred = 13661822 (d0767e hex)

Update flash: Are you sure (y/n)? y

Erasing

: 0x01D00000 - 0x01D1FFFF

Programming : 0x01D00000 - 0x01D1FFFF

Verifying

: 0x01D00000 - 0x01D1FFFF

Boot> flashinfo

Flash Information(Bytes)

Area OS size Default-OS Standby-OS OS Version

-------------------------------------------------------------

os1

13661806 * *

3.18 #1009

os2 13661412

3.12

#1008

Boot>