Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

38                                                                         A50010-Y3-C150-2-7619 

After using these commands in order: show clock → configure terminal → interface 1 
→ exit, press the arrow key <↑> and then you will see the commands from latest one: 
exit

 → interface 1 → configure terminal → show clock. 

SWITCHconfig)# exit 

SWITCH# show clock 

Mon, 5 Jan 1970 23:50:12 GMT+0000 

SWITCH# configure terminal 

SWITCH(config)# interface 1 

SWITCH(config-if)# exit 

SWITCH(config)# exit 

SWITCH# (press the arow key ↑) 

 

↓ 

SWITCH# exit (arrow key ↑) 

 

↓ 

SWITCH# interface 1 (arrow key ↑) 

 

↓ 

SWITCH# configure terminal (arrow key ↑) 

 

↓ 

SWITCH# show clock (arrow key ↑) 

 

The hiD 6615 S223/S323 also provides the command that shows the commands used 
before up to 100 lines. 

 history 

Enable 

Shows a command history. 

 

Most of the commands can be used also with abbreviated form. The following table 
shows some examples of abbreviated commands. 

cl 

ex 

sh 

con te 

Command Abbreviation 

 

You can execute the commands of Privileged EXEC Enable mode as show, ping, telnet, 
traceroute

, and so on regardless of which mode you are located on. 

To execute the commands of Privileged EXEC Enable mode on another mode, use the 
following command. 

do COMMAND

 

All 

Executes the commands of Privileged EXEC mode.